Innov-is M380D
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_inovm380deas.jpg)
Innov-is M380D
Sort by
41 Results
1. 07/12/2024
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
2. 07/12/2024
"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
3. 06/28/2024
"Preventive maintenance is recommended." ppears on the LCD.
4. 01/25/2023
"USB media error" message appears on the LCD. What does it mean?
5. 01/25/2023
"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." message appears on the LCD.
6. 01/24/2023
"The wireless security information (Authentication method, Encryption method, Network Key) is incorrect." message appears on the LCD. What does it mean?
7. 01/24/2023
"The authentication and encryption methods used by the selected wireless LAN access point/router are not supported by your machine." message appears on the LCD. What does it mean?
8. 01/18/2023
"The wireless LAN access point/router cannot be detected. " message appears on the LCD. What does it mean?
9. 09/24/2021
"The SSID and Network Key are incorrect." message appears on the LCD. What does it mean?
10. 09/08/2021
"The wireless setting is not activated." message appears on the LCD. What does it mean?
11. 09/08/2021
"The machine is still trying to connect to your wireless network." message appears on the LCD. What does it mean?
12. 07/18/2018
"Lower the presser foot lever." message appears on the LCD. What does it mean?
13. 07/18/2018
"Lower the buttonhole lever." message appears on the LCD. What does it mean?
14. 02/21/2018
"F07" appears on the LCD. What does it mean?
15. 02/21/2018
"F06" appears on the LCD. What does it mean?
16. 02/21/2018
"F05" appears on the LCD. What does it mean?
17. 02/21/2018
"F04" appears on the LCD. What does it mean?
18. 02/21/2018
"F03" appears on the LCD. What does it mean?
19. 02/21/2018
"F02" appears on the LCD. What does it mean?
20. 02/21/2018
"F01" appears on the LCD. What does it mean?
21. 07/21/2017
"The bobbin thread is almost empty." message appears on the LCD during embroidering and the machine has stopped. What does it mean?
22. 07/21/2017
"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
23. 07/21/2017
"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." message appears on the LCD. What does it mean?
24. 07/21/2017
"This pattern cannot be loaded as the pattern extends out of the editable area." message appears on the LCD. What does it mean?
25. 07/21/2017
"Not enough available memory to save the pattern. Delete another pattern?." message appears on the LCD. What does it mean?
26. 07/21/2017
"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
27. 02/28/2017
"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?
28. 02/28/2017
"Raise the buttonhole lever." message appears on the LCD. What does it mean?
29. 02/28/2017
"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
30. 07/29/2016
"Not enough available memory to save." message appears on the LCD. What does it mean?