Innov-is 600
FAQs & Troubleshooting |
Innov-is 600
Sort by
14 Results
1. 05/20/2024
F** or "F*" appears on the LCD. What does it mean?
2. 03/31/2016
"No more stitches can be combined." message appearing on the LCD. What does it mean?
3. 03/31/2016
"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
4. 03/31/2016
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
5. 03/31/2016
"Winding bobbin thread." message appearing on the LCD. What does it mean?
6. 04/07/2009
"Lower the presser foot lever." appears on the LCD.
7. 04/07/2009
"Lower the buttonhole lever." appears on the LCD.
8. 04/07/2009
"Lift the buttonhole lever." appears on the LCD.
9. 04/07/2009
"The safety device has been activated." appears on the LCD.
10. 03/04/2009
"Release twin needle setting." message appearing on the LCD. What does it mean?
11. 03/04/2009
"Saving..." message appearing on the LCD. What does it mean?
12. 02/26/2009
"Can not change." message appearing on the LCD. What does it mean?
13. 02/26/2009
"Delete the selected pattern." appears on the LCD.
14. 02/26/2009
"Disconnect the foot control." appears on the LCD.