MFC-7470D
FAQs & Troubleshooting |
MFC-7470D
Sort by:
31 Results
1. 05/28/2024
Toner Low or Prepare New Toner Cartridge
2. 12/19/2022
I just replaced the toner cartridge and the LCD continues to display the message "Toner Low" / "Replace Toner" / "Toner Ended" or the Toner LED is still on or flashing.
3. 02/15/2022
REPLACE DRUM
4. 06/04/2020
Check Connection
5. 07/17/2018
MANUAL FEED
6. 11/21/2016
Replace Toner
7. 03/24/2016
TONER ENDED
8. 03/24/2016
Size mismatch
9. 03/24/2016
Drum End Soon
10. 01/17/2014
JAM INSIDE
11. 04/25/2013
JAM TRAY 1
12. 04/25/2013
How do I clear the "Awaiting Redial" message?
13. 01/31/2013
Scan Unable
14. 01/31/2013
Clear the "Scanner Locked" error message.
15. 11/02/2012
Drum Error (Drum!)
16. 10/02/2012
Why does the message "No Response/Busy" appear on my Transmission Verification Report?
17. 08/06/2012
CARTRIDGE ERROR
18. 08/06/2012
NO TONER
19. 08/06/2012
Jam Rear
20. 06/29/2012
Out of Memory
21. 06/29/2012
When scanning a document to be copied or faxed, the LCD shows "OUT OF MEMORY".
22. 06/12/2012
No Paper
23. 03/20/2012
I still receive the error message "Replace Drum", "Drum End Soon", "Drum Near End", or "Drum Stop" after I replace the drum unit with a new one.
24. 02/08/2012
Print Unable
25. 01/26/2012
I don't think I got the full yield from my high-yield toner cartridge but the message "Toner Life End" or "Replace Toner" is displayed on the machine or the LED is on or flashing.
26. 02/04/2011
Duplex Disabled
27. 02/04/2011
Cover is Open
28. 02/04/2011
Document Jam
29. 02/04/2011
JAM DUPLEX
30. 07/06/2010
Drum Stop