FAQs & Troubleshooting
Popular |
TD-4420TN
105 Results
1.
How to download the BMP/PCX file into your printer by the BPM (Brother Printer Management Tool) (for Windows)
2.
The label is skipped when printing.
3.
How to adjust the print position with the BPM (Brother Printer Management Tool) (for Windows)
4.
How to calibrate the Gap/Black Mark Sensor by directly operating the printer
5.
How to adjust the cut position (For Windows)
6.
How to change the printer code page
7.
How to load the Ribbon
8.
How to connect the printer to your computer (for Windows)
9.
How to install the Mac driver via USB/ Wi-Fi®/ wired network
10.
How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer
11.
How to add a new stock from the Seagull driver
12.
The printing position of small label is incorrect.
13.
The time on the printer is incorrect.
14.
Using the CommTool (for Windows)
15.
The LED is flashing in red and the printer status from the BPM (Brother Printer Management Tool) shows "Out of Ribbon" or "Ribbon Encoder Err./Ribbon End Err".
16.
How to execute the printer configuration (Self-test) to debug
17.
How to change the speed and density in BarTender
18.
How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)
19.
How do I select just certain data (cells) in the Excel spreadsheet to place on the label? (P-touch Editor 5.x for Windows)
20.
Printing is not possible.
21.
I cannot install the Windows driver.
22.
I don't know the Product Key Code for BarTender UltraLite Edition 2021 (BarTender Designer for Brother).
23.
The label wraps around the platen roller when using the cutter.
24.
How to update firmware to all printers on the same subnet at the same time
25.
How to create a barcode from two data fields (P-touch Editor 5.x for Windows)
26.
How to transfer the print programs or templates using FBPL commands
27.
The left or right side of the label is not printed correctly.
28.
Memory full error occurred.
29.
Printing the printer configuration (Self-test)
30.
How to adjust the tear position in BarTender