FAQs & Troubleshooting
Popular |
PRS100
94 Results
1.
How to set up the cap frame. [Video instructions]
2.
How to Embroider on Bag. [Video instructions]
3.
What is DST ?
4.
How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
5.
How to set up the cap frame driver. [Video instructions]
6.
How to Embroider on Pet Collar. [Video instructions]
7.
Embroidery pattern does not sew out correctly.
8.
Creating Beautiful Embroidery ( Hooping techniques )
9.
How to Embroider on Cap. [Video instructions]
10.
Maintenance (Cleaning the thread paths of the upper threads)
11.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
12.
How do I embroider on large pieces of fabric or heavy clothing ?
13.
Stabilizers (Backing)
14.
The thread tension is incorrect.
15.
"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
16.
"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
17.
"This function cannot be used when patterns are overlapping." message appears on the LCD. What does it mean and how do I clear it?
18.
How do I resume embroidering after turning off the machine ?
19.
Color thread table
20.
How to Embroider on Shoes. [Video instructions]
21.
Maintenance (Oiling the machine)
22.
"Picker error" message appears on the LCD. What does it mean?
23.
"This USB media is incompatible." message appears on the LCD. What does it mean and how do I clear it?
24.
"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
25.
"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean and how do I clear it?
26.
"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
27.
How to select the "Eco Mode" or "Shutoff Support Mode" ?
28.
How do I attach Iron-On Stabilizer (Backing) to Fabric ?
29.
"Needle threader is in threading position." message appears on the LCD. What does it mean and how do I clear it?
30.
Why does the upper thread keep breaking?