FAQs & Troubleshooting
Popular |
Innov-is VQ3000
125 Results
1.
Combination of fabric, thread and needle
2.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
3.
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
4.
How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
5.
Fabric and Thread
6.
How to use the Binding Buttonhole Foot 1. (Optional accessory : SA105 / F083) [Video instructions]
7.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
8.
How to use the Spanish Hemstitch Attachment (Optional accessory : SA220 / F090 / F090AP) [Video instructions]
9.
How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
10.
How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
11.
How do I clean the race?
12.
How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
13.
How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
14.
How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
15.
How do I change the needle ?
16.
The bobbin thread cannot be pulled up.
17.
How do I specify the needle drop position using the sensor pen?
18.
How do I adjust the clock on the display?
19.
How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
20.
How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
21.
How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
22.
Why does the lower thread keep breaking?
23.
How do I remove or attach the presser foot holder?
24.
"OK to delete the ending point setting?" message appears on the LCD. What does it mean?
25.
About Sensor Function Area
26.
How do I calibrate the sensor pen?
27.
How do I attach the walking foot ?
28.
How do I set the bobbin ?
29.
"Transmitting by USB" message appears on the LCD. What does it mean?
30.
"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?