FAQs & Troubleshooting
Popular |
Innov-is VE2300
67 Results
1.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
2.
"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
3.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
4.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
5.
How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
6.
Embroidery
7.
How do I specify the embroidering location with the sensor pen? (Specifying the embroidery pattern location by selecting the pattern center with the sensor pen.)
8.
"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
9.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
10.
"Sensor module error." message appears on the LCD. What does it mean?
11.
"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
12.
How do I change the volume of operation sounds or alarm sounds?
13.
How do I calibrate the sensor pen?
14.
How do I change the needle ?
15.
Upper threading (Point)
16.
How do I specify the embroidering location with the sensor pen?(Specifying the embroidery pattern location by selecting the pattern edge with the sensor pen.)
17.
If the thread breaks during sewing.
18.
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
19.
"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
20.
"The needle will move. Keep your hands etc. away from the needle area." message appears on the LCD. What does it mean?
21.
How do I remove or attach the Embroidery foot ?
22.
How do I adjust the clock on the display?
23.
How do I thread my machine ?
24.
"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
25.
"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
26.
"USB media error" message appears on the LCD. What does it mean?
27.
"Attach the embroidery frame." message appears on the LCD. What does it mean?
28.
"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
29.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
30.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?