FAQs & Troubleshooting
Popular |
DC200
256 Results
1.
About Blade Extension, Cutting Pressure and Mat
2.
Mat and Material Combinations
3.
The material to be cut/drawn peels off during cutting/drawing.
4.
The machine was turned off during the machine’s software update.
5.
List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
6.
About CaptureMat FUNCTION (Wireless Network Connection Only)
7.
Adjusting the Blade Extension
8.
The mat is fed in at an angle and is not fed during cutting / drawing.
9.
List of Error Messages for CanvasWorkspace (Others)
10.
How to Use the Rhinestone Function on CanvasWorkspace for PC [Video]
11.
The mat or the material catches on a feed roller during cutting/drawing.
12.
Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
13.
How to set up the wireless connection using WLAN Assistant Wizard. (Computer Instructions)
14.
How do I transfer the pattern (to cut, draw, line emboss, etc.) using a USB cable? (Windows only)
15.
How do I Change or Delete a Registered CanvasWorkspace Login ID?
16.
Support OS Information for DesignNCut Manager
17.
If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
18.
List of Error Messages for CanvasWorkspace (E##### / N#####)
19.
How do I transfer the pattern (to cut, draw, line emboss, etc.) using a Wireless LAN connection? (Mobile Device Instructions)
20.
Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
21.
Replacement Criteria
22.
Cannot find SSID. Press [OK] button. message appears on the LCD.
23.
E00009 appears on the computer screen.
24.
List of Error Messages
25.
About DesignNCut Manager
26.
Replacing the Blade
27.
What type of cut files and projects containing cut data other than built-in patterns are available?
28.
Can rough material be cut?
29.
Can multiple sheets of material be overlapped and attached to the mat?
30.
N11001 appears on the computer screen.