FAQs & Troubleshooting
Popular |
CS-8060
39 Results
1.
Combination of fabric, thread and needle
2.
When thread got tangled.
3.
Where do I put the oil in my machine?
4.
Place a spool of thread on a spool pin.
5.
How do I manually thread the needle?
6.
How do I load the spool into the thread cassette?
7.
How do I remove the presser foot holder?
8.
An "E6" message appears on the panel.
9.
I slide the stitch width adjustment slider, but I can not adjust the stitch width (zigzag width).
10.
I slide the stitch length adjustment slider, but I can not adjust the stitch length.
11.
How do I wind the bobbin?
12.
Why does the lower thread keep breaking?
13.
When should I use the extra spool pin?
14.
"E7" message appearing on the stitch indicator. What does it mean and how do I clear it?
15.
Why does the upper thread keep breaking?
16.
How do I sew buttonholes?
17.
How do I sew such as vinyl, leather, quilting layers and velvet?
18.
How do I correctly install a bobbin?
19.
Fabric and Thread
20.
How do I thread the needle?
21.
How to I attach the spool of thread to my machine?
22.
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
23.
An "E4" message appears on the panel.
24.
An "E1" message appears on the panel.
25.
Why does my thread keep jamming?
26.
How do I sew an applique?
27.
How do I sew a blind hem?
28.
The thread is looping when I try to wind a bobbin.
29.
My auto threader is not working. What should I do?
30.
Incorrect thread tension