FAQs & Troubleshooting
Popular |
CM550DX/ CM550
300 Results
1.
Mat and Cutting Blade Combinations
2.
Mat and Material Combinations
3.
Adjusting the Blade Extension
4.
Downloading Optional Design Pattern Collection
5.
List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
6.
List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
7.
Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
8.
About Blade Extension, Cutting Pressure and Mat
9.
Can I create the cutting data for ScanNCut from the image data?
10.
What type of data can my ScanNCut machine be used?
11.
The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
12.
The mat is fed in at an angle and is not fed during cutting / drawing.
13.
Support OS Information about ScanNCut Link Plug-in for Adobe® Illustrator®
14.
ErrS02 appears on the computer screen.
15.
If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
16.
ErrS90 appears on the computer screen.
17.
ErrS52 appears on the computer screen.
18.
Replacing the Blade
19.
The mat or the material catches on a feed roller during cutting/drawing.
20.
Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
21.
How to use a Universal Pen Holder
22.
ErrS09 appears on the computer screen.
23.
E00011 appears on the computer screen.
24.
Cutting/Drawing by Tracing an Image
25.
The Calligraphy Font in the USB Flash Drive is Not Displayed
26.
Scanning a Background Image (Background Scanning).
27.
How do I Scan for Cutting (Direct Cut) ?
28.
ErrS25 appears on the computer screen.
29.
What should I do if the scanned and cut positions are misaligned?
30.
Can I create the cutting data for ScanNCut from vector graphics data?