FAQs & Troubleshooting
Popular |
PR-1000
94 Results
1.
How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
2.
How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
3.
How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
4.
How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
5.
How to set up the cap frame driver. [Video instructions]
6.
How to Embroider on Pet Collar. [Video instructions]
7.
How to Embroider on Shoes. [Video instructions]
8.
Hooping the Fabric
9.
Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
10.
Maintenance (Cleaning around the needle plate) [ Video ]
11.
"Please UNLOCK to use the Thead Trimmer." message appears on the LCD. What does it mean?
12.
How to Embroider on Clothes. [Video instructions]
13.
How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
14.
Embroidery
15.
"The pattern is too large for the extra large embroidery frame." message appears on the LCD. What does it mean?
16.
"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
17.
Maintenance (Oiling the machine) [ Video ]
18.
"Needle threader is in threading position." message appears on the LCD. What does it mean?
19.
How do I thread the machine? (Threading the upper thread)
20.
"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
21.
"Cannot communicate between PC and machine. Please check the USB cable connections to run the Link application." message appears on the LCD. What does it mean?
22.
"This embroidery card cannot be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?
23.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
24.
Maintenance (Cleaning the bobbin case)
25.
"The USB media is write-protected so the data cannot be deleted. Cancel the write-protection before trying to delete the data." message appears on the LCD. What does it mean?
26.
"Picker error" message appears on the LCD. What does it mean?
27.
"Stop while needle bar case transferring." message appears on the LCD. What does it mean?
28.
"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?
29.
"Impossible to set the start & the end points." message appears on the LCD. What does it mean?
30.
"Please set up the "Thread antenna"" message appears on the LCD. What does it mean?