FAQs & Troubleshooting
Popular |
PR1000e
94 Results
1.
How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
2.
How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
3.
How to Embroider on Bag. [Video instructions]
4.
How to Embroider on Clothes. [Video instructions]
5.
How to Embroider on Pet Collar. [Video instructions]
6.
How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
7.
How to Embroider on Shoes. [Video instructions]
8.
Maintenance (Cleaning the bobbin case) [ Video ]
9.
Maintenance (Oiling the machine)
10.
How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
11.
How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
12.
How to use the Round frame (PRPRFK1) [Video instructions]
13.
How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
14.
How to use the the versatile magnetic frame [Video instructions]
15.
"Transmitting by USB" message appears on the LCD. What does it mean?
16.
"The pattern is too large for the extra large embroidery frame." message appears on the LCD. What does it mean?
17.
"Please UNLOCK to use the Thead Trimmer." message appears on the LCD. What does it mean?
18.
"Can not find the positioning mark, please set the frame to the previous position." message appears on the LCD. What does it mean?
19.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
20.
Maintenance (Clean the hook) [ Video ]
21.
How do I create a space between characters?
22.
How do I thread the machine? (Threading the upper thread)
23.
There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
24.
"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?
25.
"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
26.
"Cannot communicate between PC and machine. Please check the USB cable connections to run the Link application." message appears on the LCD. What does it mean?
27.
"Trimming sensor error." message appears on the LCD. What does it mean?
28.
"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
29.
"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
30.
"Data volume is too large for this pattern." message appears on the LCD. What does it mean?