FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inovve2200eas.jpg)
Innov-is VE2200
68 Results
31.
"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
32.
"Attach the embroidery frame." message appears on the LCD. What does it mean?
33.
How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
34.
"Sensor module error." message appears on the LCD. What does it mean?
35.
"OK to revert to the original position and/or angle?" message appears on the LCD. What does it mean?
36.
How do I adjust the clock on the display?
37.
How do I change the needle ?
38.
How do I set the bobbin ?
39.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
40.
If the thread breaks during sewing.
41.
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
42.
"Set the clock." message appears on the LCD. What does it mean?
43.
"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
44.
"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
45.
"Failed to save file." message appears on the LCD. What does it mean?
46.
How do I wind the bobbin?
47.
"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
48.
"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
49.
"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
50.
"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
51.
Why does the lower thread keep breaking?
52.
"This file cannot be used." message appears on the LCD. What does it mean?
53.
"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
54.
"OK to reset the pattern’s border setting, position and/or angle?" message appears on the LCD. What does it mean?
55.
How do I calibrate the sensor pen?
56.
How do I attach or remove the embroidery frame ?
57.
How do I remove or attach the Embroidery foot ?
58.
How do I thread my machine ?
59.
"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
60.
"This USB media is incompatible." message appears on the LCD. What does it mean?