1.

How to Embroider on Bag. [Video instructions]

2.

How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]

3.

How to Embroider on Cap. [Video instructions]

4.

Maintenance (Oiling the machine)

5.

How to set up the cap frame. [Video instructions]

6.

How to set up the cap frame driver. [Video instructions]

7.

How do I thread the machine? (Threading the upper thread)

8.

Colors of Tajima (.dst) embroidery data

9.

What is DST ?

10.

How to Embroider on Shoes. [Video instructions]

11.

"Change to a larger embroidery frame." message appears on the LCD. What does it mean?

12.

When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.

13.

"Preventive maintenance is recommended" appears on the LCD.

14.

"OK to revert to previous color changes?" message appears on the LCD. What does it mean?

15.

The thread tension is incorrect.

16.

Nothing happens, even if the LCD display is pressed.

17.

"OK to delete the selected pattern?" message appears on the LCD.What does it mean?

18.

"Trimming sensor error." message appears on the LCD. What does it mean?

19.

"This USB media is incompatible." message appears on the LCD. What does it mean and how do I clear it?

20.

"This USB media cannot be used." message appears on the LCD. What does it mean?

21.

"This embroidery card cannot be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?

22.

"Press the unlock key to unlock the machine." message appears on the LCD. What does it mean?

23.

"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?

24.

Color thread table

25.

There are needle cuts or holes in the garment.

26.

Although the thread is not broken, a broken thread error occurs and the machine stops.

27.

The upper thread does not reach the bobbin thread when embroidering begins.

28.

The machine is noisy while embroidering.

29.

"This pattern cannot be used." message appears on the LCD. What does it mean?

30.

"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?