FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_pr1050xeas.jpg)
PR1050X
132 Results
1.
Displaying the fabric on the LCD when aligning the embroidering position
2.
Basting Embroidery
3.
How to use the Round frame (PRPRFK1) [Video instructions]
4.
How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
5.
How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
6.
How do I manually specify or manage the thread colors assigned to each needle bar?
7.
How to Embroider on Shoes. [Video instructions]
8.
There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
9.
How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
10.
Changing the embroidering position and Adjusting the angle
11.
How to Embroider on Clothes. [Video instructions]
12.
Temporary needle bar setting
13.
Maintenance (Clean the hook) [ Video ]
14.
Aligning the embroidering position using the embroidery positioning sticker
15.
Aligning the embroidering position using the built-in camera
16.
How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
17.
How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
18.
How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
19.
How do I set the machine to trim the threads between the characters?
20.
Maximum sewing speed setting
21.
The needle threader cannot be used.
22.
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
23.
How do I thread the machine? (Threading the upper thread)
24.
"Cannot recognize the embroidery positioning mark." message appears on the LCD. What does it mean?
25.
"Please set up the "Thread antenna"" message appears on the LCD. What does it mean?
26.
Embroidery Data Precautions (About the types of embroidery data that can be used.)
27.
How do I change the needle?
28.
"Can't use this key during camera mode." message appears on the LCD. What does it mean?
29.
Specifying jumpstitch trimming or DST jump codes for trimming
30.
How do I specify the starting position or the ending position of embroidering?