1.

How to use the Multi-purpose Screwdriver. [ Position “2” ]

2.

"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?

3.

"Preventive maintenance is recommended" appears on the LCD.

4.

How do I change the needle ?

5.

"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?

6.

"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?

7.

"Data volume is too large for this pattern." message appears on the LCD. What does it mean?

8.

When thread got tangled.

9.

"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?

10.

If the thread breaks during sewing.

11.

"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?

12.

"Set the clock." message appears on the LCD. What does it mean?

13.

How do I adjust the clock on the display?

14.

How do I wind the bobbin?

15.

"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?

16.

"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?

17.

"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?

18.

"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?

19.

"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?

20.

"Transmitting by USB" message appears on the LCD. What does it mean?

21.

"The bobbin thread is almost empty." message appears on the LCD. What does it mean?

22.

When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.

23.

How to use the Multi-purpose Screwdriver. [ Position “3” ]

24.

How to use the Multi-purpose Screwdriver. [ Position “1” ]

25.

How to use the Multi-purpose Screwdriver.

26.

"This file cannot be used." message appears on the LCD. What does it mean?

27.

"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?

28.

"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?

29.

"OK to delete the selected pattern?" message appears on the LCD. What does it mean?

30.

"Failed to save file." message appears on the LCD. What does it mean?