1.

Where do I put the oil in my machine?

2.

How do I adjust thread tension for embroidering?

3.

How do I hoop the fabric in the embroidery frame?

4.

How to use the Multi-purpose Screwdriver. [ Position “3” ]

5.

How do I save the embroidery patterns in the machine’s memory?

6.

How do I clean the race?

7.

When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?

8.

How to use the Multi-purpose Screwdriver.

9.

"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?

10.

Fabric puckers

11.

How do I adjust the sensitivity of the operation keys?

12.

How do I retrieve the patterns from the machine’s memory?

13.

"This USB media cannot be used." message appears on the LCD. What does it mean?

14.

"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?

15.

"Preventive maintenance is recommended" appears on the LCD.

16.

High-pitched sound while embroidering

17.

"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?

18.

"Check and rethread the upper thread." message appears on the LCD. What does it mean?

19.

Stitches are skipped

20.

How do I edit a single letter in the embroidery pattern?

21.

"Selected pattern field extends to the outside of the embroidery frame." message appears on the LCD. What does it mean?

22.

When the thread became tangled under the bobbin winder seat

23.

How do I remove or attach the Embroidery foot ?

24.

How do I thread the machine (Threading the upper thread)?

25.

How do I wind the bobbin?

26.

"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?

27.

"Data volume is too large for this pattern." message appears on the LCD. What does it mean?

28.

Upper thread breaks.

29.

"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?

30.

"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?