1.

Upper Threading (Threading the upper thread)

2.

How do I retrieve a specific embroidery pattern from the computer to the machine via a USB media?

3.

It is difficult to pass the thread through the needle bar thread guide(hook).

4.

"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?

5.

How do I clean the race?

6.

Embroidery

7.

"The bobbin thread is running out." message appearing on the LCD. What does it mean?

8.

"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?

9.

"Insert an embroidery card." message appearing on the LCD. What does it mean?

10.

How do I wind the bobbin?

11.

"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?

12.

"Cannot sew on this screen." message appearing on the LCD. What does it mean?

13.

"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?

14.

When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?

15.

Why is the outline sewing off the pattern?

16.

Place a spool of thread on a spool pin.

17.

F** or "F*" appears on the LCD. What does it mean?

18.

How do I save often-used patterns in the machine's memory?

19.

"Raise presser foot lever." message appearing on the LCD. What does it mean?

20.

"Total size of the pattern is too large. Rotate the pattern." message appearing on the LCD. What does it mean and how do I clear it?

21.

"This pattern cannot be used." message appearing on the LCD. What does it mean?

22.

"Select a pattern." message appearing on the LCD. What does it mean?

23.

"Turn off the machine, and attach the embroidery unit." message appearing on the LCD.What does it mean?

24.

How do I select patterns from the embroidery cards (sold separately)?

25.

Upper threading (Point)

26.

How do I correctly install a bobbin?

27.

Where do I put the oil in my machine?

28.

"Lower the presser foot lever." appears on the LCD.

29.

How do I create a space between characters?

30.

"Deleting..." message appearing on the LCD. What does it mean?