FAQs & Troubleshooting
Popular |
Innov-is I /
Innov-is 6000D
165 Results
1.
How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
2.
How to use the Multi-purpose Screwdriver.
3.
When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
4.
How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
5.
Why does the lower thread keep breaking?
6.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
7.
How do I set the bobbin ?
8.
How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
9.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
10.
Fabric and Thread
11.
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
12.
Why does the upper thread keep breaking?
13.
"OK to delete the selected picture?" message appears on the LCD. What does it mean?
14.
How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
15.
How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
16.
"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
17.
"Transmitting by USB" message appears on the LCD. What does it mean?
18.
"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
19.
Combination of fabric, thread and needle
20.
For better results when sewing stretch fabrics
21.
"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?
22.
Why is there an extra needle plate supplied with my machine?
23.
"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
24.
"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
25.
"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
26.
Why does the needle keep breaking?
27.
How do I correctly install a bobbin?
28.
The bobbin thread cannot be pulled up.
29.
The machine does not make stitches
30.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?