1.

How to use the Round frame (PRPRFK1) [Video instructions]

2.

How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]

3.

Maintenance (Oiling the machine) [ Video ]

4.

How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]

5.

How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]

6.

Maintenance (Clean the hook) [ Video ]

7.

How to set up the cap frame driver. [Video instructions]

8.

How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]

9.

"Picker error" message appears on the LCD. What does it mean?

10.

"This pattern cannot combine." message appears on the LCD. What does it mean?

11.

"Data volume is too large for this pattern." message appears on the LCD. What does it mean?

12.

Maintenance (Cleaning around the needle plate) [ Video ]

13.

"Needle bar case home position error." message appears on the LCD. What does it mean?

14.

How do I thread the machine? (Threading the upper thread)

15.

 Stabilizers (Backing)

16.

"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean?

17.

"Remove the embroidery positioning mark." message appears on the LCD. What does it mean?

18.

"Please make sure the PC is connected to the machine via the USB cable to run the Link application." message appears on the LCD. What does it mean?

19.

How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?

20.

Maintenance (Clean  the hook)

21.

"Needle threader is in threading position." message appears on the LCD. What does it mean?

22.

Fabric and Thread

23.

"USB media error" message appears on the LCD. What does it mean?

24.

"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?

25.

"Please UNLOCK to use the Thead Trimmer." message appears on the LCD. What does it mean?

26.

"Can't use this key during camera mode." message appears on the LCD. What does it mean?

27.

"Trimming sensor error." message appears on the LCD. What does it mean?

28.

"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?

29.

"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?

30.

"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?