FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/mfc8860dn_all.jpg)
MFC-8860DN
305 Results
61.
Can I use my Brother printer with a 64 bit Linux distribution? (Linux)
62.
I cannot print using my Brother machine on a wired network. (Windows/macOS)
63.
ControlCenter3 displays a blank screen at startup (Windows)
64.
Scan from the Brother iPrint&Scan application using Windows Phone.
65.
How to identify your Operating System (OS).
66.
I can receive a fax, but cannot receive a telephone call.
67.
When I try to scan to OCR I get an error message saying "This feature is not available because there is no OCR Software installed".
68.
I cannot scan via network getting the error "CC031" or "MTW012". (Mac OS X)
69.
When I start the Remote Setup Software, the error message "RS 005-xx" or "RS 006-xx" appears on the display.
70.
Can I set my Brother machine to forward the faxes I receive to another location?
71.
I just replaced the toner cartridge and the LCD continues to display the message "Toner Low" / "Replace Toner" / "Toner Life End" or the Toner LED is still on or flashing.
72.
I'm using Windows XP and when I attempt to install the USB drivers on my Brother machine I receive the message "Cannot Install this Hardware" and I am unable to print. What can I do?
73.
How many copies can I make when I sort multiple copies using the ADF?
74.
How do I clear the message "Paper Jam Back" from the LCD display?
75.
The message "Poor Line Condition" or "NG" appears on the Transmission Verification Report when I try to send a fax.
76.
Why doesn't the machine answer when receiving a call?
77.
The network scanning feature does not work when pressing the scan key on my Brother machine control panel. (For Windows)
78.
How do I factory reset the print server?
79.
Open the "Scanners and Cameras" and Properties.
80.
I can print but cannot scan via network. (For Mac)
81.
What is the default user name and password for my Brother network card, BRAdmin, Remote Setup or Web Based Management?
82.
Scan a document in Mac OS X 10.6.
83.
When scanning to OCR from PaperPort® 9.0SE, the following error message appears: "System error incurred in external ink module EZText.g32. The OCR server is unable to process the document". I have Windows® XP Service Pack 2 (SP2) installed. What should I do?
84.
Where is the full User's Guide? I can't find enough information in the paper manual.
85.
Replace the toner cartridge
86.
I cannot install the fax driver (brmfcfaxdrv) in Fedora 40 or later, or in its derivatives. (Linux)
87.
I cannot scan with brscan, brscan2, or brscan3 via USB (Linux)
88.
My machine prints 2-sided when I select 1-sided printing in the driver (Linux)
89.
Protect your Brother machine against unauthorised access over the network
90.
How to launch and use the DeviceSelector to configure the scanner? (For Macintosh)