FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inov980deas.jpg)
Innov-is 980D
97 Results
61.
"Turn off the machine, and attach the embroidery unit." message appearing on the LCD. What does it mean?
62.
"The bobbin thread is running out." message appearing on the LCD. What does it mean?
63.
"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
64.
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
65.
"Winding bobbin thread." message appearing on the LCD. What does it mean?
66.
How do I remove the presser foot holder?
67.
How do I sew buttonholes?
68.
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
69.
Embroidery
70.
With free-motion quilting, skipped stitches or needle breakage occur
71.
"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
72.
"Disconnect the foot controller." message appearing on the LCD. What does it mean?
73.
"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
74.
"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
75.
"Change to the single needle mode." appears on the LCD.
76.
"The safety device has been activated." appears on the LCD.
77.
How do I raise or lower the feed dogs?
78.
How do I select patterns from the embroidery cards (sold separately)?
79.
Why does my thread keep jamming?
80.
How do I sew a blind hem?
81.
How do I save often-used patterns in the machine's memory?
82.
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
83.
"Deleting..." message appearing on the LCD. What does it mean?
84.
"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
85.
"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
86.
"Lower the buttonhole lever." appears on the LCD.
87.
"Lift the buttonhole lever." appears on the LCD.
88.
"Cannot sew on this screen." message appearing on the LCD. What does it mean?
89.
"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
90.
The thread tension is incorrect.