FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inovv3eas.jpg)
Innov-is V3
58 Results
1.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
2.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
3.
How to use the Multi-purpose Screwdriver.
4.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
5.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
6.
How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
7.
Embroidery
8.
How do I change the needle ?
9.
"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
10.
How do I adjust the clock on the display?
11.
If the thread breaks during sewing.
12.
"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
13.
How do I remove or attach the Embroidery foot ?
14.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
15.
Why is the outline sewing off the pattern?
16.
"Preventive maintenance is recommended" appears on the LCD.
17.
"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
18.
"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
19.
Why does the lower thread keep breaking?
20.
"This file cannot be used." message appears on the LCD. What does it mean?
21.
"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
22.
"Set the clock." message appears on the LCD. What does it mean?
23.
"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
24.
How do I attach or remove the Embroidery Unit?
25.
How do I thread my machine ?
26.
How do I set the bobbin ?
27.
"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
28.
"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
29.
"Attach the embroidery frame." message appears on the LCD. What does it mean?
30.
"Data volume is too large for this pattern." message appears on the LCD. What does it mean?