FAQs & Troubleshooting
Popular |
Innov-is NV800E
57 Results
1.
How do I adjust thread tension for embroidering?
2.
Tutorial videos on how to use the machine [Video instructions]
3.
How do I select or display patterns according to the embroidery frame size?
4.
How to use the Multi-purpose Screwdriver.
5.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
6.
How do I hoop the fabric in the embroidery frame?
7.
How do I adjust the sensitivity of the operation keys?
8.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
9.
How do I clean the race?
10.
Where do I put the oil in my machine?
11.
How do I wind the bobbin?
12.
When the thread became tangled under the bobbin winder seat
13.
"This pattern cannot be used." message appears on the LCD. What does it mean?
14.
Fabric puckers
15.
How do I edit a single letter in the embroidery pattern?
16.
How do I change the font type in the embroidery pattern?
17.
"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
18.
How do I remove or attach the Embroidery foot ?
19.
How do I thread the machine (Threading the upper thread)?
20.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
21.
"USB media error" message appears on the LCD. What does it mean?
22.
Needle breaks.
23.
Upper thread breaks.
24.
"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
25.
How do I retrieve the patterns from the machine’s memory?
26.
How do I save the embroidery patterns in the machine’s memory?
27.
"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?
28.
"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
29.
How do I attach or remove the Embroidery Unit?
30.
How do I set the bobbin ?