FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inovv3seeas.jpg)
Innov-is V3 SE
57 Results
31.
How do I remove or attach the Embroidery foot ?
32.
How do I thread my machine ?
33.
How do I set the bobbin ?
34.
How do I create a space between characters?
35.
"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
36.
"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
37.
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
38.
"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
39.
"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
40.
"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
41.
"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
42.
"Attach the embroidery frame." message appears on the LCD. What does it mean?
43.
"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
44.
When thread got tangled.
45.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
46.
If the thread breaks during sewing.
47.
"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
48.
"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
49.
"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
50.
How do I attach or remove the Embroidery Unit?
51.
Where do I put the oil in my machine?
52.
How do I wind the bobbin?
53.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
54.
"Lower the presser foot lever." message appears on the LCD. What does it mean?
55.
"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
56.
When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
57.
How do I clean the race?