FAQs & Troubleshooting
Popular |
PR670E / PR670EC
99 Results
1.
Tutorial videos on how to use the machine [Video instructions]
2.
How to Embroider on Clothes. [Video instructions]
3.
How to Embroider on Shoes. [Video instructions]
4.
How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
5.
How to Embroider on Bag. [Video instructions]
6.
Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
7.
How do I attach or remove the embroidery frame ?
8.
How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
9.
How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
10.
How to set up the cap frame driver. [Video instructions]
11.
How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
12.
Loops appear on the surface of the fabric when embroidering.
13.
"Check upper and bobbin thread." message appears on the LCD. What does it mean?
14.
How do I change the needle?
15.
"Stop while needle bar case transferring." message appears on the LCD. What does it mean?
16.
How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
17.
How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
18.
How to use the the versatile magnetic frame [Video instructions]
19.
"Impossible to set the start & the end points." message appears on the LCD. What does it mean?
20.
How do I check the thread tension ?
21.
How do I attach Iron-On Stabilizer (Backing) to Fabric ?
22.
"Needle bar case position error" message appears on the LCD. What does it mean?
23.
"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
24.
"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
25.
"Go to Embroidering Screen and press the unlock key." message appears on the LCD. What does it mean?
26.
"OK to cancel the current pattern selection?" message appears on the LCD. What does it mean?
27.
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
28.
"Trimming sensor error." message appears on the LCD. What does it mean?
29.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
30.
Maintenance (Cleaning the bobbin case) [ Video ]