FAQs & Troubleshooting
Popular |
CM700
327 Results
1.
Mat and Material Combinations
2.
About Blade Extension, Cutting Pressure and Mat
3.
Mat and Cutting Blade Combinations
4.
List of Error Messages for CanvasWorkspace (E##### / N#####)
5.
The mat is fed in at an angle and is not fed during cutting / drawing.
6.
Can I create the cutting data for ScanNCut from the image data?
7.
Adjusting the Blade Extension
8.
The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
9.
Downloading Optional Design Pattern Collection
10.
List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
11.
What should I do if the scanned and cut positions are misaligned?
12.
E10004 appears on the computer screen.
13.
If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
14.
E94005 appears on the computer screen.
15.
How do I Scan for Cutting (Direct Cut) ?
16.
E11010 appears on the computer screen.
17.
How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
18.
N11001 appears on the computer screen.
19.
An error appears when trying to import a DXF file.
20.
Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
21.
Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
22.
Can I create the cutting data for ScanNCut from vector graphics data?
23.
List of Error Messages for CanvasWorkspace (Others)
24.
ErrS12 appears on the computer screen.
25.
E00005 appears on the computer screen.
26.
E00003 appears on the computer screen.
27.
FC1 files on USB flash drives of optional patterns cannot be imported into CanvasWorkspace.
28.
The mat or the material catches on a feed roller during cutting/drawing.
29.
ErrS03 appears on the computer screen.
30.
What should I do if the desired network SSID is not displayed when setting up the wireless network using the Setup Wizard?