CM550DX/ CM550
FAQs & Troubleshooting |
CM550DX/ CM550
Sort by
12 Results
1. 30/09/2019
The Pattern for Paper Piercing or The Paper Piercing Menu Is Not Displayed.
2. 08/07/2019
How to Calibrate the LCD Touchscreen Display
3. 07/09/2018
The “Transfer FCM File via the Internet...” function cannot be used.
4. 10/07/2017
The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
5. 10/07/2017
The mat is fed in at an angle and is not fed during cutting / drawing.
6. 10/07/2017
The mat or the material catches on a feed roller during cutting/drawing.
7. 10/07/2017
When the mat is inserted, the attached material peels off.
8. 01/12/2016
The machine cannot be turned on.
9. 08/08/2016
What should I do if the scanned and cut positions are misaligned?
10. 31/07/2015
The material being cut catches on the tip of the cutting blade.
11. 28/11/2013
The machine stopped while an operation is being performed.
12. 28/11/2013
The mat or the material catches on a feed roller when the mat is being inserted.