FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hl1210w_eu_as.jpg)
HL-1210W
150 Results
1.
Configure the Brother machine for a wireless network using automatic wireless mode (Wi-Fi Protected Setup™ or AOSS™)
2.
Setup a Brother machine on a wireless (Wi-Fi) network using the supplied CD-ROM without a USB cable.
3.
(Video) Load A5 paper
4.
Replace Toner
5.
(Video) Load A4/Letter paper
6.
(Video) Setup a Brother machine on a wireless (Wi-Fi) network.
7.
The error message "No Supported Devices Found" appears on the Brother iPrint&Scan screen (mobile device).
8.
The Error LED is still on or flashing after I replace the drum unit with a new one.
9.
Jam Tray
10.
I updated my Windows 11 PC through Windows Update and I can no longer Print, Scan or Fax from my PC.
11.
The printer status is Offline or Paused.
12.
What is Brother iPrint&Scan?
13.
I cannot repair the wired or wireless connection using the Network Connection Repair Tool (Windows)
14.
Replace Drum
15.
Load paper in the paper tray
16.
What is Toner Continue Mode?
17.
Setup a Brother machine on a wireless (Wi-Fi) network using the supplied CD-ROM with a USB cable.
18.
I just replaced the toner cartridge and the LCD continues to display the message "Toner Low" / "Replace Toner" / "Toner Ended" or the Toner LED is still on or flashing.
19.
Jam Inside
20.
Wrong Paper Type
21.
Drum End Soon
22.
Service Call
23.
Heater Error or Self-Diagnostic
24.
Print or scan using the Brother iPrint&Scan application for mobile devices (Android/iOS)
25.
(Video) Set up your Brother machine
26.
My Brother machine could not be found over the network when I installed drivers on my PC.
27.
Cartridge Error
28.
Out of Memory
29.
What is the recommended paper?
30.
I cannot connect to the printer via Wi-Fi Direct using the Brother Print Service Plugin (Android™ 12 or later).