FAQs & Troubleshooting
Popular |
PR670E / PR670EC
99 Results
1.
How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
2.
Tutorial videos on how to use the machine [Video instructions]
3.
How to use the Round frame (PRPRFK1) [Video instructions]
4.
How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
5.
"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
6.
How do I adjust the tension of the bobbin thread ?
7.
How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
8.
How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
9.
How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
10.
The bobbin thread breaks.
11.
How do I wind the bobbin?
12.
How to set up the cap frame driver. [Video instructions]
13.
How to Embroider on Bag. [Video instructions]
14.
How to Embroider on Pet Collar. [Video instructions]
15.
How to Embroider on Cap. [Video instructions]
16.
Maintenance (Cleaning the bobbin case)
17.
"Needle case motor has been locked." message appears on the LCD. What does it mean?
18.
How do I attach Iron-On Stabilizer (Backing) to Fabric ?
19.
Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
20.
Maintenance (Cleaning around the needle plate)
21.
"Needle bar case home position error." message appears on the LCD. What does it mean?
22.
Why does the upper thread keep breaking?
23.
"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean?
24.
There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
25.
"Please set up the "Thread antenna"" message appears on the LCD. What does it mean?
26.
How do I check the thread tension ?
27.
The needle threader cannot be used.
28.
Nothing happens, even if the LCD display is pressed.
29.
Although the thread is not broken, a broken thread error occurs and the machine stops.
30.
"This USB media cannot be used." message appears on the LCD. What does it mean?