FAQs & Troubleshooting
Popular |
TJ-4021TN
109 Results
1.
I don't know the Product Key Code for BarTender UltraLite Edition 2021 (BarTender Designer for Brother).
2.
The left or right side of the label is not printed correctly.
3.
How to connect the printer to your computer
4.
Printing is not possible.
5.
How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)
6.
The printing position of small label is incorrect.
7.
How to adjust the cut position (For Windows)
8.
How to skip the AUTO.BAS program only one time by directly operating the printer
9.
The LED is lit in red and the printer status from the BPM (Brother Printer Management Tool) shows "Head Open".
10.
How to install the Windows driver via Wi-Fi® / wired network
11.
My printed documents are incomplete or a blue screen appears when printing after a Windows 10 update (March 2021)
12.
Using the CommTool (for Windows)
13.
How to load the Media
14.
How to install the Mac driver via USB / Wi-Fi® / wired network
15.
Printed barcodes cannot be read.
16.
How to adjust the print position with the BPM (Brother Printer Management Tool)
17.
(Video) How do I create an Address Label using Microsoft Word Add-In and formatting the text? (P-touch Editor 5.x for Windows)
18.
How to set the Direct Thermal or Thermal Transfer Print Methods
19.
How to install the Windows driver via Wi-Fi® / wired network
20.
How to calibrate the Gap/Black Mark Sensor by directly operating the printer
21.
How to load the Ribbon
22.
How to transfer the print programs or templates using FBPL commands
23.
When I open a CSV file in P-touch Editor, some characters are garbled. (P-touch Editor 5.x)
24.
Printing the printer configuration (Self-test)
25.
(Video) How to create a barcode from two data fields (P-touch Editor 5.x for Windows)
26.
The print quality is poor.
27.
The LED is flashing in red and the printer status from the BPM (Brother Printer Management Tool) shows "Out of Ribbon" or "Ribbon Encoder Err. / Ribbon End Err".
28.
How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer
29.
Some parts of the label are not printed. (P-touch Editor 5.x for Windows)
30.
How to add a new stock from the Seagull driver