FAQs & Troubleshooting
Popular |
TJ-4020TN
109 Results
1.
How to calibrate the Gap/Black Mark Sensor by directly operating the printer
2.
How to transfer the print programs or templates using FBPL commands
3.
How to download the BMP file into your printer by the BPM (Brother Printer Management Tool)
4.
The printing position of small label is incorrect.
5.
How to install the Windows driver via Wi-Fi® / wired network
6.
The left or right side of the label is not printed correctly.
7.
How to adjust the print position with the BPM (Brother Printer Management Tool)
8.
How to load the Ribbon
9.
The LED is flashing in red and the printer status from the BPM (Brother Printer Management Tool) shows “Paper Jam”.
10.
How to add a new stock from the Seagull driver
11.
How to load the Media
12.
How to insert a new image into each label using a database file. (P-touch Editor 5.x for Windows)
13.
My printed documents are incomplete or a blue screen appears when printing after a Windows 10 update (March 2021)
14.
How to execute the printer configuration (Self-test) to debug
15.
How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer
16.
Printing the printer configuration (Self-test)
17.
The LED is flashing in red and the printer status from the BPM (Brother Printer Management Tool) shows "Out of Paper".
18.
The LED is lit in red and the printer status from the BPM (Brother Printer Management Tool) shows "Head Open".
19.
How do I select just certain data (cells) in the Excel spreadsheet to place on the label? (P-touch Editor 5.x for Windows)
20.
Printing is not possible.
21.
BarTender UltraLite Edition 2021 (BarTender Designer for Brother) displays the error #1401 during printing.
22.
How to install the Windows driver via Wi-Fi® / wired network
23.
How to reset the printer settings by directly operating the printer
24.
When I open a CSV file in P-touch Editor, some characters are garbled. (P-touch Editor 5.x)
25.
Using the CommTool (for Windows)
26.
The label is skipped when printing.
27.
How to skip the AUTO.BAS program only one time by directly operating the printer
28.
How to change the printer code page
29.
How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)
30.
How to update the firmware