FAQs & Troubleshooting
Popular |
HL-1210W
152 Results
1.
Replace Toner
2.
Configure the Brother machine for a wireless network using automatic wireless mode (Wi-Fi Protected Setup™ or AOSS™)
3.
Jam Inside
4.
The error message "No Supported Devices Found" appears on the Brother iPrint&Scan screen (mobile device).
5.
Setup a Brother machine on a wireless (Wi-Fi) network using the supplied CD-ROM without a USB cable.
6.
What do the LED indications mean?
7.
Replace Drum
8.
The printer status is Offline or Paused.
9.
Print or scan using the Brother iPrint&Scan application for mobile devices (Android/iOS)
10.
Setup a Brother machine on a wireless (Wi-Fi) network using the supplied CD-ROM with a USB cable.
11.
What is Brother iPrint&Scan?
12.
(Video) Load A4/Letter paper
13.
Load paper in the paper tray
14.
My Brother machine could not be found over the network when I installed drivers on my PC.
15.
I just replaced the toner cartridge and the LCD continues to display the message "Toner Low" / "Replace Toner" / "Toner Ended" or the Toner LED is still on or flashing.
16.
No Paper
17.
(Video) Setup a Brother machine on a wireless (Wi-Fi) network.
18.
How to identify your Operating System (OS).
19.
(Video) Set up your Brother machine
20.
(Video) Load A5 paper
21.
"Offline" appears on the Status Monitor.
22.
Cartridge Error
23.
No Toner
24.
Cover is Open
25.
Unable to print or scan when using Brother iPrint&Scan from my Windows Phone® mobile device.
26.
Can I print from and scan to iPhone, iPod Touch and iPad?
27.
The Error LED is still on or flashing after I replace the drum unit with a new one.
28.
I cannot connect to the printer via Wi-Fi Direct using the Brother Print Service Plugin (Android™ 12 or later).
29.
Check the remaining ink or toner level (Linux)
30.
(Video) Unpack your Brother machine