FAQs & Troubleshooting
Popular |
PR670E
99 Results
1.
Tutorial videos on how to use the machine [Video instructions]
2.
There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
3.
How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
4.
How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
5.
How to set up the cap frame driver. [Video instructions]
6.
How to Embroider on Bag. [Video instructions]
7.
How to Embroider on Shoes. [Video instructions]
8.
How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
9.
How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
10.
"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
11.
Maintenance (Cleaning the bobbin case) [ Video ]
12.
How to use the Round frame (PRPRFK1) [Video instructions]
13.
Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
14.
How do I adjust the tension of the bobbin thread ?
15.
How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
16.
How to Embroider on Cap. [Video instructions]
17.
Maintenance (Oiling the machine)
18.
How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
19.
How to set up the cap frame. [Video instructions]
20.
How to Embroider on Clothes. [Video instructions]
21.
How to use the the versatile magnetic frame [Video instructions]
22.
Loops appear on the surface of the fabric when embroidering.
23.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
24.
"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
25.
"The USB media is write-protected so the data cannot be saved. Cancel the write-protection before trying to save the data." message appears on the LCD. What does it mean?
26.
How do I install a bobbin into the machine?
27.
"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
28.
Maintenance (Cleaning the thread paths of the upper threads)
29.
Nothing happens, even if the LCD display is pressed.
30.
"Check upper and bobbin thread." message appears on the LCD. What does it mean?