FAQs & Troubleshooting
Popular |
CM900
327 Results
1.
Mat and Material Combinations
2.
About Blade Extension, Cutting Pressure and Mat
3.
The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
4.
How to register Your Machine with CanvasWorkspace
5.
Adjusting the Blade Extension
6.
Mat and Cutting Blade Combinations
7.
List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
8.
What should I do if the scanned and cut positions are misaligned?
9.
List of Error Messages for CanvasWorkspace (Others)
10.
ErrS90 appears on the computer screen.
11.
Can I create the cutting data for ScanNCut from the image data?
12.
The mat is fed in at an angle and is not fed during cutting / drawing.
13.
If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
14.
Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
15.
What type of data can my ScanNCut machine be used?
16.
Downloading Optional Design Pattern Collection
17.
An error appears when trying to import a DXF file.
18.
How do I Scan for Cutting (Direct Cut) ?
19.
The machine is turned off (Auto Shut Down).
20.
E12004 appears on the computer screen.
21.
How do I recall a saved data from the machine's memory or USB flash drive?
22.
ErrS02 appears on the computer screen.
23.
How to Use the Printable Sticker Function on CanvasWorkspace for PC [Video]
24.
E00003 appears on the computer screen.
25.
How to create an account for CanvasWorkspace
26.
Instructions for “Fit to Path” Function on CanvasWorkspace (Windows/Mac)
27.
Instructions for sending patterns created in CanvasWorkspace to the cutting machine for cutting or drawing.
28.
Support OS Information about ScanNCut Link Plug-in for Adobe® Illustrator®
29.
List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
30.
How to Use the Enhanced Image Tracing on CanvasWorkspace for PC [Video]