FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_600_2euk.jpg)
PR-620/620C/600II/600IIC
69 Results
1.
How do I thread the needle. [Video instructions]
2.
How do I thread my machine (Threading the upper thread). [Video instructions]
3.
There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
4.
Why is the outline sewing off the pattern?
5.
How to set up the cap frame driver. [Video instructions]
6.
How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
7.
How to set up the cap frame. [Video instructions]
8.
Embroidery
9.
"Area over." appears on the LCD.
10.
Fabric and Thread
11.
Hooping the Fabric
12.
When I sew an embroidery pattern exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the PR series?
13.
How do I find if I am using Windows® 98 Second Edition?
14.
"USB media is not loaded. Load USB media." appears on the LCD.
15.
"USB media error." appears on the LCD.
16.
"The USB media is write-protected so the data cannot be saved. Cancel the write-protection before trying to save the data." appears on the LCD.
17.
"Needle bar case home position error." appears on the LCD.
18.
The needle threader cannot be used.
19.
Why does my thread keep jamming?
20.
Why won't the tension set on my sewing machine?
21.
Why won't the machine pick up the bobbin thread?
22.
How do I install the bobbin wound with thread
23.
Recommendation accessories
24.
"Delete error." appears on the LCD.
25.
"Impossible to reserve this needle." appears on the LCD.
26.
"This embroidery card cannot be used." appears on the LCD.
27.
"Embroidery card read error." appears on the LCD.
28.
"Check if thread is broken." appears on the LCD.
29.
"Stop while needle bar case transferring." appears on the LCD.
30.
Fabric/stabilizer compatibility chart