FAQs & Troubleshooting
Popular |
FAX-2820
78 Results
1.
Why does my machine display "Awaiting Redial"?
2.
My documents are not feeding through the Automatic Document Feeder (ADF) when I try to send a fax, scan to the PC, or make a copy.
3.
What is the recommended paper specification for use on my machine?
4.
How do I check if the FAX/MFC has faxes in its memory.
5.
What can happen if the wrong paper is used in your machine.
6.
Stop my Brother machine from automatically redialing a busy number.
7.
How can I forward a fax to another fax machine when the FAX/MFC has a mechanical problem?
8.
My FAX/MFC will not Dial. Why?
9.
Can I reduce the size of a received fax on this machine?
10.
Replace the drum unit.
11.
The error message "No Supported Devices Found" appears in Brother iPrint&Scan (mobile device).
12.
Change the quality of the faxes I send (Fax Resolution).
13.
Can I set my Brother machine to forward the faxes I receive to another location?
14.
How do I store numbers on my fax machine for easy dialing? (One-Touch, Speed Dial)
15.
How do I clean white or black spots on printed documents?
16.
Document Jam
17.
What is Distinctive Ring and how do I program it?
18.
Why doesn't the machine answer when receiving a call?
19.
Can I confirm that the FAX was sent correctly?
20.
What does "NG" or "ERROR" on the Transmission Verification Report mean?
21.
Can I use non-Brother or third party supplies with the Brother machine?
22.
Can I print from or scan to an iPhone, iPod Touch or iPad?
23.
Recently, when I print a document from the manual feed slot, my Brother machine is taking more time than usual to start feeding paper. How can I reduce the time it takes to start feeding paper?
24.
How do I adjust the settings of the ring volume, beeper volume and speaker volume on my Brother machine?
25.
Can I print from or scan to an Android™ Smartphone?
26.
I'm using Voice Over Internet Protocol (VoIP) and am having problems receiving faxes.
27.
I am experiencing problems receiving faxes. What can I do?
28.
ControlCenter3 displays a blank screen at startup (Windows)
29.
The paper is skewed when it's printed.
30.
I just replaced the toner cartridge and the LCD continues to display the message "Toner Low" / "Replace Toner" / "Toner Life End" or the Toner LED is still on or flashing.