FAQs & Troubleshooting
Popular |
SuperGalaxie3000/3100D
75 Results
31.
How do I sew an applique?
32.
"Lower the presser foot lever." appears on the LCD.
33.
"This disk is write protected. Can not delete the pattern. Dis-engage the write protection and try to delete again." appears on the LCD.
34.
"Cannot format this disk. This may be the wrong type of disk, or the disk may be defective. Please change the floppy disk." appears on the LCD.
35.
"Raise the buttonhole lever." appears on the LCD.
36.
How do I wind the bobbin?
37.
"Cannot save to this disk. The disk may be defective. Change the disk and try to save again." appears on the LCD.
38.
"This disk is not formatted. Do you want to format this disk? Formatting the disk will erase any data currently on the disk." appears on the LCD.
39.
"The needle is down. Press the needle position button to raise the needle." appears on the LCD.
40.
"This function can not be used while the machine is in twin needle mode. Cancel twin needle mode and choose the function again." appears on the LCD.
41.
"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
42.
"Retrieving the pattern. Wait a moment." appears on the LCD.
43.
"Lower the buttonhole lever." appears on the LCD.
44.
"Raise presser foot lever." message appearing on the LCD. What does it mean?
45.
"Not enough available memory to save the pattern. Delete another pattern? Change the floppy disk?" appears on the LCD.
46.
"Deleting..." appears on the LCD.
47.
"There is no embroidery card in the card slot. Insert an embroidery card." appears on the LCD.
48.
"Not enough available memory to save the pattern. Delete another pattern?" appears on the LCD.
49.
"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
50.
"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
51.
"This button does not operate when the embroidery unit is attached." message appears on the LCD. What does it mean?
52.
My outline is sewing off the pattern
53.
My needle keeps breaking
54.
How do I sew hook-and-loop fasteners (hook-and-loop tapes)?
55.
"This disk is write protected. Cannot save the pattern. Dis-engage the write protection and save again." appears on the LCD.
56.
"This embroidery card cannot be used. Unusable cards include, cards licensed for sale in other countries," appears on the LCD.
57.
"The carriage of the embroidery unit will move. Keep your hands away from the carriage." appears on the LCD.
58.
"The bobbin winder safety device has activated. Is the thread tangled?" appears on the LCD.
59.
"Check and rethread the upper thread." appears on the LCD.
60.
My thread keeps jamming.