NX-400Q/400
FAQs & Troubleshooting |
NX-400Q/400
Sort by
14 Results
1. 20/05/2024
F** or "F*" appears on the LCD. What does it mean?
2. 17/03/2022
"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
3. 18/01/2008
"Lower the presser foot lever." appears on the LCD.
4. 17/01/2008
"Change to the single needle mode." appears on the LCD.
5. 17/01/2008
"Lower buttonhole lever." appears on the LCD.
6. 17/01/2008
"Lift the buttonhole lever." appears on the LCD.
7. 17/01/2008
"Disconnect the foot control." appears on the LCD.
8. 07/12/2007
"Delete the selected pattern." appears on the LCD.
9. 13/11/2007
"The safety device has been activated." appears on the LCD.
10. 28/06/2006
"Cannot change." appears on the LCD.
11. 23/06/2006
"Saving..." appears on the LCD.
12. 23/06/2006
"No more stitches can be combined." appears on the LCD.
13. 22/06/2006
"Return the bobbin winding shaft to left." appears on the LCD.
14. 22/06/2006
"Winding bobbin thread." appears on the LCD.