1. 20/05/2024

F** or "F*" appears on the LCD. What does it mean?

2. 17/03/2022

"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?

3. 02/07/2018

"Disconnect the foot controller." message appearing on the LCD. What does it mean?

4. 04/06/2018

"Raise presser foot lever." message appearing on the LCD. What does it mean?

5. 04/06/2018

"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?

6. 04/06/2018

"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?

7. 18/01/2008

"Lower the presser foot lever." appears on the LCD.

8. 17/01/2008

"Selected a pattern." appears on the LCD.

9. 17/01/2008

"Change to the single needle mode." appears on the LCD.

10. 17/01/2008

"Lower buttonhole lever." appears on the LCD.

11. 17/01/2008

"Lift the buttonhole lever." appears on the LCD.

12. 13/11/2007

"The safety device has been activated." appears on the LCD.

13. 28/06/2006

"Press the needle position button to raise the needle." appears on the LCD.

14. 28/06/2006

"Deleting..." appears on the LCD.

15. 23/06/2006

"Not enough available memory. Delete another pattern?" appears on the LCD.

16. 23/06/2006

"This pattern cannot be used." appears on the LCD.

17. 23/06/2006

"OK to save the current settings?" appears on the LCD.

18. 23/06/2006

"Turn off the machine and attach the embroidery unit." appears on the LCD.

19. 23/06/2006

"This embroidery card can not be used on this machine." appears on the LCD.

20. 23/06/2006

"Saving..." appears on the LCD.

21. 23/06/2006

"The bobbin thread is running out." appears on the LCD.

22. 23/06/2006

"The pattern is too large for the embroidery frame." appears on the LCD.

23. 23/06/2006

"This button does not operate when the embroidery unit is attached." appears on the LCD.

24. 22/06/2006

"The carriage of the embroidery unit will move." appears on the LCD.

25. 22/06/2006

"Return the bobbin winding shaft to left." appears on the LCD.

26. 22/06/2006

"Winding bobbin thread." appears on the LCD.

27. 22/06/2006

"Cannot sew on this screen." appears on the LCD.

28. 22/06/2006

"Check and rethread the upper thread." appears on the LCD.