PR-600/600C
FAQs & Troubleshooting |
PR-600/600C
Sort by
42 Results
1. 07/01/2008
"Preventive maintenance is recommended" appears on the LCD.
2. 06/07/2006
"Impossible to reserve this needle." appears on the LCD.
3. 06/07/2006
"The thread number is invalid." appears on the LCD.
4. 06/07/2006
"Needle threader is in threading position." appears on the LCD.
5. 06/07/2006
"Impossible to set the start & the end points." appears on the LCD.
6. 06/07/2006
"Impossible to add anymore characters." appears on the LCD.
7. 06/07/2006
"This file cannot be used." appears on the LCD.
8. 06/07/2006
"Unknown data format." appears on the LCD.
9. 06/07/2006
"Change to the big frame." appears on the LCD.
10. 06/07/2006
"The selected embroidery pattern exceeds size of the frame." appears on the LCD.
11. 06/07/2006
"Characters cannot be aligned." appears on the LCD.
12. 06/07/2006
"Too many colours." appears on the LCD.
13. 06/07/2006
"Maximum number of patterns have been combined." appears on the LCD.
14. 06/07/2006
"Pattern is too large." appears on the LCD.
15. 06/07/2006
"This pattern contains too much data to be stored." appears on the LCD.
16. 06/07/2006
"There is no embroidery card in the card slot. Insert an embroidery card." appears on the LCD.
17. 06/07/2006
"This embroidery card cannot be used." appears on the LCD.
18. 06/07/2006
"Embroidery card read error." appears on the LCD.
19. 06/07/2006
"Pocket read error." appears on the LCD.
20. 06/07/2006
"USB read error." appears on the LCD.
21. 06/07/2006
"CompactFlash Card erase error." appears on the LCD.
22. 06/07/2006
"CompactFlash card read error." appears on the LCD.
23. 06/07/2006
"Cannot use this card." appears on the LCD.
24. 06/07/2006
"No CompactFlash card." appears on the LCD.
25. 06/07/2006
"Floppy disk was changed." appears on the LCD.
26. 06/07/2006
"Cannot format." appears on the LCD.
27. 06/07/2006
"Floppy disk erase error." appears on the LCD.
28. 06/07/2006
"Floppy disk write protect." appears on the LCD.
29. 06/07/2006
"Save error." appears on the LCD.
30. 06/07/2006
"Floppy disk read error." appears on the LCD.