1. 21/06/2023

How can I use Crop Print function? (How to print multiple barcodes from a PDF file separately) (For Windows only)

2. 10/02/2022

How to adjust the cut position (For Windows)

3. 10/02/2022

How to set the Direct Thermal or Thermal Transfer Print Methods

4. 11/03/2021

How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)

5. 09/07/2020

RFID calibration does not finish or fails. I cannot write RFID tags.

6. 09/07/2020

An RFID error occurred.

7. 07/04/2020

How to calibrate the RFID

8. 25/02/2020

How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer

9. 25/02/2020

How to calibrate the Gap/Black Mark Sensor by directly operating the printer

10. 25/02/2020

How to execute the printer configuration (Self-test) to debug

11. 25/02/2020

When printing with the thermal transfer method, the print or cutting position gradually shifts.

12. 25/02/2020

Printing is not possible.

13. 25/02/2020

Printing the printer configuration (Self-test)

14. 10/01/2020

How to adjust the print position with the BPM (Brother Printer Management Tool)

15. 14/03/2019

The left or right side of the label is not printed correctly.

16. 14/03/2019

The printing position of small label is incorrect.

17. 14/03/2019

How to change the speed and density in BarTender

18. 14/03/2019

How to change the printer code page

19. 14/03/2019

How to adjust the tear position in BarTender

20. 14/03/2019

How to adjust the printout position

21. 14/03/2019

How to add a new stock from the Seagull driver

22. 14/03/2019

The print quality is poor.