1. 10/02/2022

How to adjust the cut position (For Windows)

2. 10/02/2022

How to set the Direct Thermal or Thermal Transfer Print Methods

3. 11/03/2021

How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)

4. 25/02/2020

How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer

5. 25/02/2020

How to calibrate the Gap/Black Mark Sensor by directly operating the printer

6. 25/02/2020

How to execute the printer configuration (Self-test) to debug

7. 25/02/2020

When printing with the thermal transfer method, the print or cutting position gradually shifts.

8. 25/02/2020

Printing is not possible.

9. 25/02/2020

Printing the printer configuration (Self-test)

10. 10/01/2020

How to adjust the print position with the BPM (Brother Printer Management Tool)

11. 14/03/2019

The left or right side of the label is not printed correctly.

12. 14/03/2019

The printing position of small label is incorrect.

13. 14/03/2019

How to change the speed and density in BarTender

14. 14/03/2019

How to change the printer code page

15. 14/03/2019

How to adjust the tear position in BarTender

16. 14/03/2019

How to adjust the printout position

17. 14/03/2019

How to add a new stock from the Seagull driver

18. 14/03/2019

The print quality is poor.