1. 13/12/2021

How to adjust the cut position (For Windows)

2. 13/12/2021

How to set the Direct Thermal or Thermal Transfer Print Methods

3. 29/01/2021

How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)

4. 29/01/2021

How to adjust the print position with the BPM (Brother Printer Management Tool) (for Windows)

5. 28/09/2020

Printing the printer configuration (Self-test)

6. 28/09/2020

The print quality is poor.

7. 28/09/2020

The left or right side of the label is not printed correctly.

8. 28/09/2020

The printed label is wrinkled.

9. 28/09/2020

How to skip the AUTO.BAS program only one time by directly operating the printer

10. 28/09/2020

How to execute the printer configuration (Self-test) to debug

11. 28/09/2020

How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer

12. 28/09/2020

How to calibrate the Gap/Black Mark Sensor by directly operating the printer

13. 20/02/2020

When printing with the thermal transfer method, the print or cutting position gradually shifts.

14. 19/02/2020

Printing is not possible.

15. 13/03/2019

The printing position of small label is incorrect.

16. 13/03/2019

How to change the speed and density in BarTender

17. 13/03/2019

How to change the printer code page

18. 13/03/2019

How to adjust the tear position in BarTender

19. 13/03/2019

How to adjust the printout position

20. 13/03/2019

How to add a new stock from the Seagull driver