FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/rj3035beuk.jpg)
RJ-3035B
55 Results
1.
The left or right side of the label is not printed correctly.
2.
How to check the battery life
3.
Enable or disable Bluetooth Low Energy (BLE)
4.
How to set Bluetooth Local Name or PIN code using the BPM (Brother Printer Management Tool) (for Windows)
5.
How to install the Mac driver via USB/ Wi-Fi®/ wired network
6.
BarTender UltraLite Edition 2021 (BarTender Designer for Brother) displays the error #1401 during printing.
7.
How to connect the printer to your computer (for Windows)
8.
How to adjust the print position with the BPM (Brother Printer Management Tool) (for Windows)
9.
Using the CommTool (for Windows)
10.
How to transfer the print programs or templates using FBPL commands
11.
How to add a new stock from the Seagull driver
12.
I don't know the Product Key Code for BarTender UltraLite Edition 2021 (BarTender Designer for Brother).
13.
My printed documents are incomplete or a blue screen appears when printing after a Windows 10 update (March 2021)
14.
I cannot pair the printer with a Bluetooth® device as my iOS / iPadOS device reconnects to the printer automatically.
15.
How to get an alert log file using the BPM (Brother Printer Management Tool) (for Windows)
16.
How to calibrate the Gap/Black Mark Sensor by directly operating the printer
17.
Printing is not possible.
18.
I can no longer print from my computer via Bluetooth®, even though I was able to print previously.
19.
I cannot automatically reconnect my iPhone 11 to the printer via Bluetooth®.
20.
I cannot install the Windows driver.
21.
How to open the Devices and Printers window
22.
How to install the Roll Holder (PA-RH-002) (Optional)
23.
How to install the Roll Spacer Set (Optional)
24.
Where can I find the printer's network settings, such as IP address?
25.
How to execute the printer configuration (Self-test) to debug
26.
How to change the printer code page
27.
How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)
28.
How to adjust the tear position in BarTender
29.
How to update the firmware
30.
How to update firmware to all printers on the same subnet at the same time