1.

How to install the Mac driver via USB/ Wi-Fi®/ wired network

2.

RFID calibration does not finish or fails. I cannot write RFID tags.

3.

Printing is not possible.

4.

Using the CommTool (for Windows)

5.

How to calibrate the RFID

6.

The LED is flashing in red and the printer status from the BPM (Brother Printer Management Tool) shows “Paper Jam”.

7.

Update the Bluetooth®/Wi-Fi® module's firmware to use Bluetooth Low Energy (BLE)

8.

I cannot install the Windows driver.

9.

My printed documents are incomplete or a blue screen appears when printing after a Windows 10 update (March 2021)

10.

How to install the Windows driver via Wi-Fi®/ wired network

11.

How to download the BMP/PCX file into your printer by the BPM (Brother Printer Management Tool) (for Windows)

12.

The time on the printer is incorrect.

13.

The label is skipped when printing.

14.

Some parts of the label are not printed. (P-touch Editor 5.x for Windows)

15.

The label wraps around the platen roller when using the cutter.

16.

The left or right side of the label is not printed correctly.

17.

The printing position of small label is incorrect.

18.

How to execute the printer configuration (Self-test) to debug

19.

How to calibrate the Gap/Black Mark Sensor by directly operating the printer

20.

How to set Bluetooth Local Name or PIN code using the BPM (Brother Printer Management Tool) (for Windows)

21.

Enable or disable Bluetooth Low Energy (BLE)

22.

How to connect the printer to your computer (for Windows)

23.

How to install the Windows driver via Bluetooth®

24.

The LED is flashing in red and the printer status from the BPM (Brother Printer Management Tool) shows "Out of Paper".

25.

The LED is flashing in red and the printer status from the BPM (Brother Printer Management Tool) shows "Out of Ribbon" or "Ribbon Encoder Err./Ribbon End Err".

26.

The LED is lit in red and the printer status from the BPM (Brother Printer Management Tool) shows "Head Open".

27.

How to transfer the print programs or templates using FBPL commands

28.

How do I reset Wi-Fi® setting?

29.

BarTender UltraLite Edition 2021 (BarTender Designer for Brother) displays the error #1401 during printing.

30.

The print quality is poor.