FAQs & Troubleshooting
Popular |
HL-L2312D
135 Results
1.
(Video) Load A4/Letter paper
2.
Print on Both Sides of the Paper Automatically (Automatic 2-sided Printing)
3.
(Video) Replace the Toner Cartridge
4.
(Video) Connect the cord
5.
Reset the Drum Counter
6.
What is Toner Continue Mode?
7.
(Video) Paper is Jammed in the Back of the Machine
8.
Install your Brother machine's driver to print and scan from your Mac (macOS 10.14 or earlier)
9.
(video) I just replaced the toner cartridge and the LCD continues to display the message "Toner Low" / "Replace Toner" / "Toner Ended" or the Toner LED is still on or flashing.
10.
(Video) Paper is Jammed inside the Machine
11.
(Video) Unpack your Brother machine and install the toner cartridge
12.
(Video) Load an Envelope (Manual Feed Slot)
13.
Turn the Toner Save Mode on or off.
14.
I still receive the error message "Replace Drum" or "Drum End Soon" after I replace the drum unit with a new one.
15.
I just replaced the toner cartridge and the LCD continues to display the message "Toner Low" / "Replace Toner" / "Toner Ended" or the Toner LED is still on or flashing.
16.
(Video) Paper is Jammed in the Paper Tray
17.
Load Paper in the Paper Tray
18.
Manual Feed
19.
Replace Drum
20.
Envelope creases
21.
What is the recommended paper?
22.
LED Patterns and Indications
23.
(Video) Set up your Brother machine
24.
TONER ENDED
25.
Clean the Paper Pick-up Rollers
26.
(Video) Paper is Jammed in the 2-sided Tray
27.
No Toner
28.
Set Auto Power Off Mode
29.
Stop the paper feeding twice through the machine when printing single pages with 2-sided(duplex) switched to on in the printer driver. (For Windows Only)
30.
The error message "No Supported Devices Found" appears on the Brother iPrint&Scan (mobile device).