FAQs & Troubleshooting
Popular |
HL-2270DW
215 Results
1.
I just replaced the toner cartridge and the LCD continues to display the message "Toner Low" / "Replace Toner" / "Toner Ended" or the Toner LED is still on or flashing.
2.
REPLACE TONER
3.
JAM INSIDE
4.
NO PAPER T1
5.
I cannot connect to the printer via Wi-Fi Direct using the Brother Print Service Plugin (Android™ 12 or later).
6.
Configure the Brother machine for a wireless network with a USB cable using the Wireless setup wizard on the Brother installer application
7.
The Drum LED is still on or flashing after I replace the drum unit with a new one.
8.
The printer status is Offline or Paused.
9.
JAM REAR
10.
JAM TRAY 1
11.
What is Brother iPrint&Scan?
12.
Configure the Brother machine for a wireless network using automatic wireless mode (Wi-Fi Protected Setup or AOSS™)
13.
The error message "No Supported Devices Found" appears on the Brother iPrint&Scan screen (mobile device).
14.
JAM DUPLEX
15.
REPLACE DRUM
16.
Reset the print server to the default factory settings.
17.
I cannot repair the wired or wireless connection using the Network Connection Repair Tool (Windows)
18.
Delete print jobs from the print queue.
19.
Stop the paper feeding twice through the machine when printing single pages with 2-sided(duplex) switched to on in the printer driver. (For Windows Only)
20.
"Offline" appears on the Status Monitor.
21.
CARTRIDGE ERROR
22.
What is the recommended paper?
23.
Turn the Toner Save Mode on or off.
24.
What is Toner Continue Mode?
25.
Print the Network Configuration page.
26.
Can I print from or scan to Android™ Smartphone?
27.
How to identify your Operating System (OS).
28.
Recently, when I print a document from the manual feed slot, my Brother machine is taking more time than usual to start feeding paper. How can I reduce the time it takes to start feeding paper?
29.
FRONT COVER OPEN or FUSER COVER OPEN
30.
The printer prints unexpectedly or it prints garbage data.