FAQs & Troubleshooting
Popular |
HL-2150N
165 Results
1.
How can I activate/deactivate the Toner Save Mode?
2.
The error message "No Supported Devices Found" appears on the Brother iPrint&Scan (mobile device).
3.
My printed documents are incomplete or a blue screen appears when printing or using PC-FAX after a Windows 10 update (March 2021)
4.
I just replaced the toner cartridge and the LCD continues to display the message "Toner Low" / "Replace Toner" / "Toner Life End" or the Toner LED is still on or flashing.
5.
What can happen if the wrong paper is used in your machine.
6.
The Drum LED is still on or flashing after I replace the drum unit with a new one.
7.
The error message "Invalid format for short nick name" appears when printing a document. (Mac OS X 10.5 or greater)
8.
The printer status is Offline or Paused.
9.
The printer cannot print full pages of a document. An error message MEMORY FULL is printed.
10.
Can I print from or scan to Android™ Smartphone?
11.
What kind of paper can I use?
12.
The message "[file name] can't be opened because it is from an unidentified developer." appears on OS X v10.8.x.
13.
The paper is skewed when it's printed.
14.
"Clean Corona Wire" message continues to appear on the PC screen, even though I have cleaned the corona wire of the drum unit.
15.
Printouts have wrinkles or creases.
16.
Replace the drum unit.
17.
Cannot print after a Windows 10 update (June 2020)
18.
Where is the Manual 2-sided(Duplex) setting option in the Mac OS X 10.3 driver or greater?
19.
Printouts have a curl or wave.
20.
Can I print from DOS applications?
21.
What are the differences between the BRAdmin Professional and the Web BRAdmin software?
22.
What is the printable area per page?
23.
What is the recommended paper?
24.
My Antivirus Software gives a warning message during the installation of Web BRAdmin.
25.
Can I use my Brother printer with a 64 bit Linux distribution? (Linux)
26.
"Offline" appears on the Status Monitor.
27.
The LEDs on the control panel of the printer indicate "Drum Error". Though I cleaned the corona wire, this error message was not cleared. What can I do?
28.
How do I change the length of time the machine will wait until it goes into Sleep Mode?
29.
Delete print jobs from the print queue.
30.
Recently, when I print a document from the manual feed slot, my Brother machine is taking more time than usual to start feeding paper. How can I reduce the time it takes to start feeding paper?