FAQs & Troubleshooting
Popular |
Innov-is V3 LE
57 Results
1.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
2.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
3.
How to use the Multi-purpose Screwdriver.
4.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
5.
How do I attach or remove the embroidery frame ?
6.
How do I adjust the clock on the display?
7.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
8.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
9.
How do I thread my machine ?
10.
"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
11.
"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
12.
Embroidery
13.
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
14.
"Set the clock." message appears on the LCD. What does it mean?
15.
"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
16.
"Failed to save file." message appears on the LCD. What does it mean?
17.
How do I change the volume of operation sounds or alarm sounds?
18.
How do I remove or attach the Embroidery foot ?
19.
How do I wind the bobbin?
20.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
21.
"USB media error" message appears on the LCD. What does it mean?
22.
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
23.
"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
24.
Why does the lower thread keep breaking?
25.
If the thread breaks during sewing.
26.
"This file cannot be used." message appears on the LCD. What does it mean?
27.
"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
28.
"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
29.
"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
30.
How do I attach or remove the Embroidery Unit?